Raspberry Pi

Case RPi4 & JUMBOspot (not included) | Includes 2.4″Nextion screen | JRPi-1NSX

For Raspberry Pi 4, 3B+, 3B, 2B, and B+ (not included), ZUMspot (not included) or N5BOC Lonestar Board, and 2.4″ Enhanced Nextion screen (included).Case can fit JumboSPOT or N5BOC Lonestar BoardIncludes a 2.4″ Enhanced Nextion screen*Heatsinks and rubber feet includedStainless steel hardwareThe new inner layers have been designed to fit the Pimoroni Fan Shim (not included, available from Pimoroni)*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.The Nextion Enhanced NX3224K024 is a powerful 2.4″ HMI TFT display, with 16MB Flash data storage space, 1024 byte EEPROM, and 3584 byte RAM:supports built-in RTCsupports save data to Flashsupports GPIOlarger flash capacitylarger CPU clockNotes on fit of Pimoroni Fan Shim (not included)The clearance between the fan shim (not included) and most radio boards is very slim and not all boards will work with the fan shim if there are components or solder points above the fan. The fan shim has been tested to work with the Zumspot versions 0.4, 0.5, 0.6 and MMDVM Duplex as long as there is no previous solder left over from an OLED screen. The fan shim does NOT work with the N5BOC Lonestar Board***Made at our shop in the state of Washington, USA!C4LABS IS DEDICATED TO PROVIDING THE VERY BEST CASES AND CUSTOMER SERVICE IN THE INDUSTRY

Case for RPi4 & ZUMspot(not included) | Includes 2.4″Nextion screen | ZRPi-1NSX

Deja un comentario /

For Raspberry Pi 4, 3B+, 3B, 2B, and B+ (not included), ZUMspot (not included), and 2.4″ Enhanced Nextion screen (included). The Nextion Enhanced NX3224K024 is a powerful 2.4″ HMI TFT display, with 16MB Flash data storage space, 1024 byte EEPROM, and 3584 byte RAM.

ZRPi-3.5NSX case: RPi 3B+ ZUMspot MMDVM (not included),&3.5″Nextion(incl)

Deja un comentario /

Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.

Raspberry Pi 5 Case, Custom 3D Printed with Silicone Bumper Pads, Ventilated

Deja un comentario /

Raspberry Pi 5 Case with Silicone Bumper Pads Compatible with Official Raspberry Pi Active Cooler Elevate your Raspberry Pi 5 setup with this expertly designed, custom 3D-printed case. Perfect for tech enthusiasts and DIY project builders, this case enhances functionality and adds a sleek, modern touch to your device. Designed to be compatible with the Official Raspberry Pi Active Cooler, this case ensures your Raspberry Pi 5 runs smoothly and efficiently. Key Features:Compatible with Official Raspberry Pi Active Cooler: Designed to work seamlessly with the official Raspberry Pi Active Cooler for enhanced thermal management.High-Quality 3D Printing: Constructed using premium PLA filament, known for its strength and eco-friendliness. The material ensures durability and a smooth finish that stands out.Heat Management: Thoughtfully designed vents allow optimal airflow, keeping your Raspberry Pi 5 cool during intensive operations, ensuring performance and longevity.Enhanced Protection: Comes with four 8mm x 2mm silicone bumper pads. These pads help absorb shocks and vibrations and prevent slippage, keeping your device securely positioned.Easy Access to Ports: The case design includes precise cutouts for all standard ports, ensuring easy access without removing the case. This makes it ideal for hassle-free connections.Color Options: Available in various colors to match your personal style or decor. Please specify your color choice at checkout. Additional Information:Eco-Friendly Material: Made with biodegradable PLA filament, promoting environmentally responsible tech customization.Hand-Inspected Quality: Each case is individually printed and inspected to ensure top-notch quality and customer satisfaction. What’s Included:1 x Custom 3D-Printed Case for Raspberry Pi 54 x Silicone Bumper Pads1 x Power Button Specifications:Material: Made with biodegradable PLA filament, promoting environmentally responsible productionColor Options: Black, Red, White, or any combination of two colors for the top and bottom piecesDimensions: 92mm length x 63mm width x 32mm height (3.62 inches x 2.48 inches x 1.26 inches)Weight: 2 ounces Color Customization:Choose from black, red, or white.Mix and match top and bottom pieces in different colors for a personalized look. 3D Printing Information:Disclaimer: This model is 3D printed, which means there may be some minor imperfections or layer lines visible. These are natural characteristics of 3D printing and do not affect the overall quality or durability of the model. Why Choose Us?Expert Design: Designed by a Raspberry Pi enthusiast with attention to detail and functionality.Quality Craftsmanship: Produced using state-of-the-art 3D printing technology for precision and durability.Environmental Responsibility: Made with biodegradable PLA filament to promote eco-friendly practices. Order Now and Enhance Your Raspberry Pi 5 Setup with the Perfect Case Compatible with the Official Raspberry Pi Active Cooler!Tags Raspberry Pi Case, 3D Printed Case, Raspberry Pi 5, Official Active Cooler, Custom Raspberry Pi Enclosure, Pi 5 Case, Portable Computing, DIY Electronics, Pi 5 Accessories, Eco-Friendly, Biodegradable PLA

SmartiPi Touch 2 Case for Raspberry Pi 3, 4, 5 with Cooling Fan – Black

Deja un comentario /

SmartiPi Touch 2 Case for Raspberry Pi. If you’re looking for a case that not only protects your Raspberry Pi but enhances its functionality, the SmartiPi Touch 2 Case is your ultimate choice. With its compatibility across multiple Raspberry Pi models and official accessories, state-of-the-art cooling fan, and stylish design, this case provides everything you need for an efficient and aesthetically pleasing setup.

Raspberry Pi Pico Plastic Case Protective Enclosure Cover Multi Color

Deja un comentario /

This protective enclosure is part of the Raspberry Pi Pico product line, ensuring a perfect fit for your mini Raspberry Pi device. Compatible with Raspberry Pi Pico. 1 × Raspberry Pi Pico plastic case.